ÆßÃõ¼º½

Make: JCB
Model: 260T
Stock #: U228458
Serial number: 2491902
Year: 2016
Hours: 464
Category: Skidsteer
Location: Lansing
Total price: $59,900.00
Transmission type: 2 Speed
Attachments: POWER QUICKTACH
Cab / ROPS: Cab W/ Heaqt & A/C
Classification: ÆßÃõ¼º½-A
Description: 12 Month 1000-hour Equipment Extended PT+H Protection Plan available. Ask for details.


Machine Summary

Year Make Model Serial Number Stock Number Hours Price
2016 JCB 260T 2491902 U228458 464 $59,900.00

Certification ÆßÃõ¼º½-A

ÆßÃõ¼º½ Certified
  • Extensive multi-point inspection performed by trained technicians
  • Meets or exceeds wear criteria for certification class
  • Planned Maintenance lube service completed
  • Powertrain parts warranty included
  • All machines work-ready
Certification ClassABC
Overall Certification
Checkmark
Age / Hours
Checkmark
Appearance
Checkmark
Powertrain
Checkmark
Hydraulics
Checkmark
Chassis
Checkmark
Electrical
Checkmark
Ground engaging
Checkmark
Warranty
Checkmark

ÆßÃõ¼º½ Certification Guidelines

CATEGORY (A) <1,000 Hrs. (B) <3,000 Hrs. (C) <5,000 Hrs
RADIATOR No leaks, Dry, No damage No leaks, Dry No leaks
ENGINE Starts and runs very well.
No leaks.
Minimal blowby.
RPM’s at spec
Starts and runs well.
Minor leaks.
Moderate blowby.
RPM’s at spec
Starts and runs.
No major leaks
Blowby not excessive.
TRANSMISSION/ TRAVEL MOTORS, FINAL DRIVES No leaks
Works properly in all speeds.
Works properly in all speeds. Works in all speeds.
BUCKET/BLADE, WORK EQUIPMENT/GROUND ENGAGING Edge 75% + of Wear Parts Edge 50% + of Wear Parts Edge 25% of Wear Parts
HYDRAULICS No leaks No external leaks No major leaks
CYLINDERS No internal or external leaks No external leaks Minimum external leaks
ATTACHMENTS/ CENTER PIN 75%+ of Wear Parts 50% of Wear Parts 25% of Wear Parts
CAB, GLASS, SEAT, SEATBELT Good cond, clean, no tears in seat cushions, no cracked glass. Seat belt good Good condition, No tears in seat cushion, no cracked glass. Seat belt good. Clean, No missing glass, Seat belt good.
METAL No damage outside.
All handles, guards, steps in place and all doors working
Minor damage. All handles, guards, steps in place and doors working Damage allowed on non- critical panels. Doors working
ELECTRICAL All gauge/monitor panels work properly along with all enabled options.
RTD works
Boom float works
Boom kickout works
Ride Control works
All Lights work properly
Back up alarm works
No Active fault codes
All gauge/monitor panels work properly along with all enabled options.
RTD works
Ride Control works
Lights working properly
Back up alarm works
No critical active fault codes.
Critical gauges/monitor working.
RTD works
Work and rear lights working.
Back up alarm works
BRAKES Working properly Working properly Working
TIRES/UC 50% tread Remains. No sidewall cuts. Matched. 35% tread Remains. Minor cuts/scratches. 25% tread Remains. Minor cuts/scratches.
PAINT Very Good Good OK
FLUIDS/FILTERS 1000 hour service if needed and all new lube filters installed. 500 hour service if needed and all new lube filters installed. 500 hour service if needed and all new lube filters installed.
WORK EQUIPMENT 75% + of Wear Parts 50% of Wear Parts 25% of Wear Parts
WARRANTY 90 Day Powertrain/Parts 60 Day Powertrain/Parts 30 Day Powertrain/Parts
Minor damage = small dents, no tears in metal, side shields & grills on core products.
Major leak = any oil dripping within 5 minutes of operation at normal operating temperature. Dust build up around area does not constitute an oil leak.

Level 1 GPS Training

January - April 2025
Join us for a training that is designed for new GPS users, machine operators or for people who would like to learn best practices for Topcon GPS.